Introduction

Aerosol paint in the market basically are 1-Component aerosol paint, the different between 1-component (1K) and 2-component(2K) is 1K dry by solvent evaporation and 2K dry by chemical reaction, 1K poor gloss and 2K high gloss, very good abrasion resistance, 1K poor weather resistance and 2K good weather resistance, 1K rust easily and 2K anti-rust.

The Tradisional single component aerosol system is unable to mix hardener and resin in a pressurized can. When the two chemicals are mixed together, the chemical reaction will cause it to solidify over a short period of time and can no longer be used, hence the limited performance. In addition the tradisional way of using spray gun system or air compressor to mix 2 packs, 2 parts or 2 components of chemicals is tedious and difficult.

NEW INNOVATION OF AEROSOL PAINT

SECOND VERSION OF SAMURAI 2K 2-COMPONENT

Single Head 2-Component Aerosol System is the ultimate breakthrough for the aerosol industry!. This world patented technology mixes resin and hardener in a can as and when needed, making it very easy compare to using a coventional air compressor system.

The traditional way of mixing two components of chemicals manually gas always been messy and complicated. Whereas a conventional aerosol system cannot pack resin and hardener within a can due to the fast chemical reaction occurs upon mixing the two. The can is uniquely integrated with an inner sleeve coupled with a suction pipe for mixing and discharging of two chemicals through a single hole. Upon puncturing of the inner sleeve, the hardener contained within will flow out to mix with the resin stored in the can body. This system is further designed in such a way that no paint can be discharged without the full puncturing of the inner sleeve. This enables the user to determine precisely that the two chemicals are mixed thoroughly upon discharging of the mixture.

FIRST VERSION OF SAMURAI 2k 2-COMPONENT

The technology of a traditional aerosol spray can is always unable to break through the limitation of which hardener and resin stored together in a can. When these two chemicals are mixes together, the chemical reaction will cause the mixed together, the chemical reaction will cause the mixed paint to solidify over a short period of time and can no longer be used.

However, our SAMURAI® development team had spent over 5 years in the development and research , and have successfully invented to total spray paint! Just a simple step with 2K SAMURAI® you can enjoy the top quality spray results, just like using a spray gun in a workshop.

THE UNIQUENESS OF 2K 2-COMPONENT SAMURAI®

  1. Practise 2 in 1 concept (mix hardener and resin) in an aerosol can.
  2. Patented in Utility Innovation & Industrial Design in Malaysia,China, Indonesia, Philipine, Thailand, Vietnam and Australia.
  3. Formula ratio of heardener to resin is 1:2(compared to formula ratio of 1:4 in the market).
  4. Guarantee highest product quality results, just like with a spray gun in a workshop.
  5. Sprayed items can be dried in temperatures between -7°C to 40°C.
  6. VOC (Volatile Organic Compounds) compliant with international convention.
  7. Easy to use, no extra equipments needed.

2K FEATURE

Top Coat Clear

TOP COAT CLEAR

Features

⇒Weather resistance
⇒Excellent abrasion resistance against scratches
⇒Good Harness and adhension
⇒Anti-corrosion

SAMURAI MOTOR CATALOGUE page 20

EPOXY METAL PRIMER

It works by penetrating deeply into surface and forms an air and water tight barrier which provides high anti-corrosive protection and long-lasting durability.

SAMURAI MOTOR CATALOGUE page 20

EPOXY SURFACE

Does your newly sprayed paint ‘bite’ the paint underneath? 2K SAMURAI® Epoxy Surfacer can help you to solve this problem.

Samurai Paint
Malaysia
Samurai Paint Indonesia
Samurai Paint Thailand
Samurai Paint Philippines
Samurai Paint
Singapore

© 2015 Samurai Paint, all right reserved.